Homes in Inver Grove Heights run the full range, from established split-levels and ramblers built in the 1960s and 70s to newer construction on the city's growing edges. Older properties tend to carry original supply lines, aging water heaters, and drain systems that have been patched more than once. Newer builds have their own issues: fixtures that need upgrading, rough-in work for added bathrooms, and sump systems that have to be right before the first hard winter. Whatever the property type, the plumbing problems that come out of it are specific, and the fix depends on knowing what you are actually dealing with.
We cover Inver Grove Heights for the full range of residential plumbing work. That includes drain cleaning, water heater repair and replacement, leak detection, sewer line service, fixture installation, repiping, and emergency calls when something cannot wait. When you call, the job gets scoped on the phone before anyone is dispatched. You know what the visit covers and what it costs before we show up.
Call (715) 961-4559 to get started.
Most plumbing calls start with a symptom, not a diagnosis. A drain that empties slowly. A water heater that runs out before the second shower. A faucet that drips at night when the house is quiet. The work below covers the situations we hear about most often, and what a visit actually involves for each one.
A water heater that stops producing hot water, takes longer to recover than it used to, or makes a rumbling noise when it heats is telling you something. Sometimes the fix is a heating element or a thermostat. Sometimes the tank has reached the point where repair is the wrong call. A visit starts with diagnosing the unit, not assuming the answer. We work on both tank and tankless systems, and we give you honest recommendations on repairs, never an upsell toward a replacement that is not needed.
A shower valve that runs cold, fluctuates wildly in temperature, or will not shut off completely is often a worn cartridge or a failing pressure-balancing unit. These are not complicated repairs, but they need the right part for the valve make and model already in the wall. We identify the valve type on the call so the visit is not a diagnostic trip followed by a second trip with parts.
A dripping faucet wastes more water than most people expect, and a seized handle that will not turn off fully is a different problem with a similar result. A running toilet can waste more water than a dripping faucet, and both are worth fixing before the water bill reflects it. Faucet repair covers compression valves, cartridge valves, and ceramic disc fixtures across kitchen and bathroom applications. When the faucet itself is past repair, we handle replacement and installation at the same visit.
Outdoor faucets and hose bibs in this region take a beating from freeze-thaw cycles. A faucet that drips from the handle or leaks at the wall after winter may have a split in the pipe behind it that did not show up until the water was turned back on. Frost-free hose bib installation is a straightforward fix that eliminates the freeze risk at the outdoor connection. Irrigation shutoffs and backflow connections at the supply are also on the plumbing side, and we handle those as part of seasonal prep or on their own when a problem shows up.
A new sink or vanity going in during a bathroom update needs the supply and drain connections done right before the cabinet goes back in. We handle the rough-in connections, the supply line hookups, and the drain assembly for kitchen and bathroom sinks, lavatories, and vanity installations. Getting the plumbing done in the right order keeps the project moving rather than pulling other trades backward.
A house built in the 1960s or 1970s may still be running on its original galvanized steel supply lines. Galvanized pipe corrodes from the inside out, and the first signs are usually reduced water pressure at fixtures, rust-colored water when a faucet has not been used in a while, and leaks that keep appearing in the same section of pipe. By the time the second or third repair has gone in, the pipe material itself is the problem, not the individual joint.
We handle whole-house repiping in copper or PEX for properties where the original system has reached that point. Targeted pipe replacement is the right call when the damage is isolated and the surrounding pipe is in reasonable condition. We tell you which situation you are in before any work is scheduled. One call and the repair is scoped.
Cast iron drain stacks and clay sewer lines are also common in properties of this age. A sewer line that backs up repeatedly, or one where camera inspection shows root intrusion or pipe separation, may be a candidate for trenchless sewer repair rather than a full open-cut replacement. Trenchless methods work well where the surrounding landscaping or paving makes excavation expensive or disruptive. We assess both options and explain what each one involves before you decide.
The cost of a plumbing repair depends on what the job actually is, and that is not always fully known until the pipe or fixture is open. A drain cleaning visit is a different scope from a main line replacement. A faucet cartridge swap is a different scope from repiping a bathroom. What moves a quote up from the initial estimate is usually a condition that was not visible from the surface, such as additional corroded pipe behind a wall, a fitting that is more deteriorated than it appeared, or a blockage that runs further down the line than expected.
When you call, describe what you are seeing. We ask the questions that help us scope the job on the phone, and we give you a rate that reflects the actual work before anything is scheduled. If the scope changes once we are on site, you hear about it before the work continues. The price is confirmed before we schedule anything.
Call (715) 961-4559 and ask what it covers. You get a straight answer.
The answer is earlier than most people expect. Rough-in plumbing for a new bathroom has to happen before the framing is closed and before tile goes down. If the supply and drain locations are set after the walls are up, the work gets harder and the disruption gets larger. Coming in at the rough-in stage means the connections are placed correctly the first time and the rest of the project can build around them.
We work alongside other trades on renovation jobs and coordinate the timing so the plumbing phase does not hold up framing, drywall, or tile. For additions and basement finishes, we handle the drain rough-in, the supply line extension, and the vent stack connections. Water pressure diagnostics are part of the process when a new bathroom is being added to an older supply system, because adding fixtures to a system that is already running low pressure makes the problem worse. We check the supply side before the rough-in is done.
Getting your plumbing problem handled starts with a quick call. We take calls every day from 9:00 AM to 8:30 PM, including weekends. For routine work, we confirm the scope and the price on the call and get the visit on the calendar at a time that works for you. For emergency calls, a burst pipe, a major leak, a sewer backup, or a water heater that stops working, we get to the situation quickly and walk you through what to do right now while the visit is being arranged.
For rental properties and commercial buildings where a tenant or a business has to stay operational, we work through the scope on the call to understand what can be done in phases and what has to happen in a single visit. Right diagnosis. Right repair. Right the first time.
If the situation is urgent, call (715) 961-4559 and describe what is happening. We will get it scoped and on the schedule.
Inver Grove Heights is our primary focus in this part of Dakota County, and we cover the surrounding communities as well. That includes South St. Paul, Newport, Mendota Heights, Sunfish Lake, and St. Paul Park. Whether the property is a single-family home, a rental unit, or a small commercial building, the process is the same. The job gets scoped on the call, the price is confirmed before we schedule, and we show up ready to work.
If you are not sure whether your address falls within our coverage area, call and ask. We will confirm before you commit to anything. One call, and the visit is booked. There is more on the full list of plumbing services.
Yes. As long as whoever is at the property can give access and can make decisions if something comes up during the visit, the owner does not need to be present. If you want to be reached by phone for any decisions that arise, let us know when you call and we will confirm how that is handled.
Rough-in plumbing for a new bathroom or a finished basement typically involves permit and inspection requirements, though the specifics depend on the scope of the work and which authority has jurisdiction at your address. We confirm what applies before the rough-in starts so the work is done to the standard the inspection requires.
Call (715) 961-4559 and describe the project, and we will walk through what the process looks like.
The plumbing work is the same, but larger properties sometimes have longer pipe runs, private supply systems, or outbuildings with their own connections, all of which affect how a job is scoped. When you call, describe the property and what you are dealing with, and we will work out the right approach before the visit is scheduled.
The most common reason is a condition that was not visible until the pipe or fixture was opened, such as additional corrosion in the surrounding pipe, a fitting that is more deteriorated than it appeared from the outside, or a blockage that extends further than the initial scope suggested. We stop and explain what changed before continuing, so you are not surprised by a different number at the end.
Homes built in the 1960s and 1970s commonly develop low water pressure and recurring leaks as galvanized steel supply lines corrode from the inside out. Cast iron drain stacks and older clay sewer lines are also common in properties of that age, and root intrusion into the sewer line is a regular issue once those lines begin to deteriorate. Calling when the first symptom shows up, rather than waiting for a second or third repair in the same spot, usually means less work and a lower total cost.
We work to limit damage to finished surfaces and discuss the access approach before any cutting or opening begins. For a job that requires opening a floor or wall, we tell you upfront what will be opened and what the restoration of that surface involves. The goal is always to do the minimum necessary to reach the pipe.
Call (715) 961-4559 and give us the details for the new address.
We note the property information and any access instructions so that future calls for that address can be handled without repeating the setup every time.
If water is actively flowing from a burst pipe or a major leak, find the main water shutoff for the house and close it. For a toilet overflow or a fixture that will not stop running, the shutoff valve is usually at the base of the toilet or under the sink. Closing the supply at the fixture or at the main stops the water from spreading while the visit is being arranged. When you call, describe what you have already done and what you are still seeing, and we will scope the repair from there.
The plumbing work itself is the same, but we understand that a kitchen drain or a grease line backup in a food service property is a more urgent situation than a slow drain in an office. When you call and describe the setting, we factor that into how we approach the scheduling conversation.
Not always. If an existing connection is in good condition and the fittings are compatible with the new appliance, the existing hookup can often be reused. We check the connection as part of the installation and let you know if anything needs to be replaced before we complete the hookup.
The internet is full of general plumbing estimates that do not account for what is actually in your walls, under your floor, or at the end of your sewer line. The only way to get an accurate picture is to describe the situation to someone who knows the work.
Call Hudson Plumbing Company at (715) 961-4559 between 9:00 AM and 8:30 PM, any day of the week.
Describe what you are seeing, get a rate based on the actual job, and find out what the visit covers before you commit to anything. Plain answers. Real pricing. Real fast response.
Browse our list of local areas. Drain and sewer work covers these nearby towns as well: Eagan, Cottage Grove, Apple Valley, Oakdale.
Every plumbing job we handle in Inver Grove Heights starts the same way: a real conversation about what is happening, what it will take to fix it, and what it will cost before we schedule anything. The table below covers the services we offer, who each one fits, and a practical note to help you decide what call to make. If a situation is not covered here, call us and we will walk through it on the phone.
| Service | Scope of Work | Best For | Good to Know |
|---|---|---|---|
| Drain Cleaning & Clog Removal |
| Slow drains, recurring backups, or a fully blocked sink or tub | A drain that keeps backing up after clearing usually points to a problem further down the line. We trace it from there rather than clearing the same spot twice. |
| Faucet & Fixture Installation |
| Dripping faucets, corroded fixtures, or new fixtures going in during a renovation | We confirm the fixture fits the existing rough-in before the visit so the job does not stall on a compatibility issue. |
| Water Heater Repair & Replacement |
| No hot water, insufficient hot water, unusual noise, or a unit that is visibly leaking | We diagnose the unit first and tell you whether a repair or replacement makes more sense before any work is scheduled. Honest recommendations on repairs, never an upsell. |
Call (715) 961-4559 between 9:00 AM and 8:30 PM any day of the week and describe what you are dealing with. We will scope it on the call and give you a rate before anything is scheduled.
(715) 961-4559